Aquacode Coffee Brewing Water 1L

Description

Aquacode is manufactured by a Taiwanese company specialising in Coffee brewing water concentrates, this water mineral is derived from a deep see Aquamarine and represents a fantastic solution to brewing coffee at home.

The average cup of coffee consists of 96% water and most of this water that comes from a tap is not ideal for brewing coffee. You can make your own brewing water but this requires some chemicals, distilled water and the whole process will take some time to learn.

Aquacode Water is a concentrate of minerals that can be added to distilled / deionised water and even normal ‘soft’ tap water.

Melbourne tap water is actually relatively soft considering that its TDS averages 31ppm, while places like Sydney has a TDS average of 118 and Brisbane a TDS average of 270ppm. Please not that your water may be different depending on your exact location and you can find this out with a quick google search.

How to use Aquacode 1L:

You will need 1 container large enough to hold your water. Add 1L of deionised / distilled water to your container depending on your desired dilution rate. Add 1 sachet to your Aquacode coffee water and be sure to squeeze out all of its contents, (this is much easier to do in comparison to other companies as Aquacode water is in a liquid form rather than undissolved powders.) Give it a shake and you are ready to use it in your kettle.

Aquacode 1L Dilution Chart:

Volume

Ca

Mg

Na

K

Hardness

TDS

0.6 8.5 22.5 0.8 0.7 113 142 1 5.1 13.5 0.5 0.4 68 85 1.5 3.4 9.0 0.3 0.3 45 57 4.5 1.1 3.0 0.1 0.1 15 19 6 0.9 2.2 0.1 0.1 11 14

Ratio based on aquacode diluted with pure water*All numbers are PPM

Included:

3x Individual Aquacode sachets

*Please note that the white Tin’s are unfortunately unavailable due to a manufacturing issue. These will be sent out as individual sachets in unmarked packaging.